manualshive.com logo in svg

Geely MK Series, Руководство пользователя

Поделиться
Скачать
Geely MK Series Скачать руководство пользователя страница 133

4. Tire Leakage

4.1. Slow down and keep driving straight. 

Drive the car carefully off the road and to 

a safe place away from traffic. Do not stop 

at the center cross of highway. Park the car 

on firm flat road.

4.2. Stop the engine and turn on hazard warn-

ing light.

4.3. Apply parking brake, and shift to “P” (for 

AT), or Reverse (for MT).

4.4. All passengers should leave the car and 

stay away from traffic.

4.5. Read the following instructions carefully.

Warning

The following instructions must be obeyed to avoid serious injuries when the vehicle is jacked up.

  

Follow the instructions on jacking up the car.

  

Do not place any part of the person under the vehicle that is being jacked up to avoid injuries.

  

Do not start or run the engine when the vehicle is jacked up.

  

Stop the car on firm and level surface, apply parking brake, and set the transmission to “P” 

(for AT), or Reverse (for MT). When necessary, place a stopper under the wheel that is diagonal 
to the tire to be replaced.

  

Confirm the carjack is positioned at the correct jacking point. Incorrect carjack position may 

damage the vehicle, the car may fall off and people will be injured.

  

Only use carjack to jack the vehicle up when replacing the tire.

  

Do not jack the vehicle up when there is people in it.

  

Do not put anything on or under the carjack when jacking the vehicle up.

  

You can only jack up the vehicle to such height that you can just remove and replace the tire. 

  

Never drive the car with leaking tires. Even a short distance of driving may result in irrecov-

erably damage of tires.

126

Part III

Содержание MK Series





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды