3.
Turn the camera on before or after connecting it to the computer. Wait a few seconds,
the computer system will recognize the camera as a USB PC Camera.
4.
You will need a webcam program, such as AMCAP, or another program that can
stream video from an external device. Many video editing programs and online
“messaging“ utilities also have this capability. If you see no video from the
camera in your program, check the program's list of “devices” and confirm the
“USB PC Camera” device is selected. If the “USB PC Camera” device does not
appear in the list of devices, leave the camera in webcam mode and restart the
program. The “USB PC Camera” device should now show up as a device, and
you can select it to enable the video stream.
Note: there is no audio when this
camera using as a webcam.
Recording Videos while Charging
1.
This camera supports recording videos while charging, which enables you to record
long videos by using an external power source.
2.
The camera will work with any standard USB DC 5V output power source, such as
USB car charger, USB wall charger, external power pack with USB output or
USB computer port.
3.
When using the USB computer port, video recording has to be started before
connecting the camera to the computer. When using an external charger or power
pack, video recording can be started before or after connecting the power source
to the camera. Any standard USB data cable may be used, a special cable is not
needed.
In-Camera Formatting
This camera supports in-camera formatting. The camera will work with various micro SD
/ SDHC memory cards formatted as FAT32. To avoid any possible memory card
compatibility issue, it’s strongly recommended to use in-camera formatting to format
memory cards. The procedure as below,
1.
Connect the Camera as a Removable disk.
2.
Press and hold Shutter button. DO NOT RELEASE the button.
3.
Disconnect the camera from the computer.
4.
Keep holding shutter button until indicator light flashes and then turns off, indicating
that formatting is completed. This will take approx 5 seconds.
Updating Firmware
