1.
This camera has no built in memory. It needs an extra micro SD memory card (Not
included in the camera)
to work. The camera supports up to 32GB micro SDHC
card. Class 4 or above is recommended.
2.
The micro SD / SDHC card, also called TF card, is 15mm x 11mm in size and has 8
pins. It is commonly used in cell phones, digital cameras, media players and USB
flash disk, etc.
3.
Insert the TF card into the TF card slot. Please make sure the side with the 8 gold pins
is inserted upwards, with the pins facing the buttons. Use your fingernail to push
the card in until you hear a “click”. The card should then be securely latched.
4.
Removing the TF card: Push the TF card inwards about 1 mm using your fingernail.
This will release the spring latch and the TF card will be ejected.
Charging:
1.
Please charge the camera before using it for the first time.
2.
Connect the camera using the USB cable to your computer or use a generic USB
charger for charging.
3.
Charging time is approx. 2.5 hours. The green indicator light is on when charging and
off when fully charged.
Video Recording:
1.
Make sure the TF card is correctly inserted.
2.
Press and hold the Power button approx. 2 secs. until the yellow indicator light turns
on. The camera is now turned on and is in video recording standby mode. Yellow
light on = video recording standby.
3.
Briefly press the “Shutter” button. The yellow indicator light flashes three times and
then turns off. Video recording has started.
4.
Press the “Shutter” button again, and the yellow indicator light will turn on. The video
recording stops and the video file is saved.
5.
If you briefly press the Power button during video recording, you will take a snapshot
(photo).
6.
Press and hold the Power button for about 3 seconds. The red light flashes 3 times and
the camera is turned off.
