Taking Pictures:
1.
Make sure the TF card is correctly inserted.
2.
Press and hold the Power button approx 2 secs. until the yellow indicator light turns on.
The camera is now turned on and is in video recording standby mode. Press the
Power button again, and the red light will turn on indicating that the camera is in
photo standby mode. Red light on = Photo standby mode.
3.
Briefly press the Shutter button, the yellow indicator light flashes. One photo is taken
and the file is saved. Continue to press the “Shutter” button to take and save more
photos.
4.
Briefly press the Power button to return to video recording standby mode.
How to Connect with Computer / Removable Disk Mode
1.
The camera is Plug and Play and will work on most computer systems. There is no
need to install any drivers.
2.
Connect the camera, with memory card inserted, to your computer using a standard
USB cable. Press and hold the power button for around 2 seconds. The camera
will be recognized by the computer as a Removable Disk.
3.
It is recommended to move or copy the files from the camera onto the hard drive for
editing, viewing etc.
Note:
The red LED will flash during data transfer.
4.
If the camera is already turned on and in standby mode, it will enter into removable
disk mode when connected to the computer.
5.
If the camera is already turned on and is recording video, it will continue to record
using USB power and at the same time will also charge the battery.
Revised on January 3, 2012 – Firmware Updating; January 5, 2012 – Webcam, Trouble
Shooting - corrupt video
808 #16 Manual R2 3 of 6
PC Camera (Webcam) Mode
1.
The camera is Plug and Play and will work on most computer systems. There is no
need to install any drivers.
2.
Remove the memory card from the camera.
