Getting to know your GME1
Now your Geeksme watch knows everything it needs to know about you it's time
you learn some things about it.
Your Geeksme watch setup
Your Geeksme watch tracker has an accelerometer that's able to track your
moves and an aluminum frame. Thanks to the accelerometer Geeksme can
detect your steps, your moves during sex or the fact that you are peacefully lying
in bed. It has a vibrating motor that will let you know when you reach a goal, get
notes or alarms go off, and a 55mAh rechargeable Lithium battery.
The interchangeable wristband that holds the tracker is made of a highly
resistant silicone polymer and can be washed using cold or lukewarm water and
soap. If necessary, you can gently brush it if some dirt gets stuck on the surface.
The wristband's buckle is made of zinc.
Battery life and charge time
Your Geeksme device battery can last up to 6 days in low consumption
conditions (low light levels, LEDs off and little use). The more demanding the
user is about the device performance, the shorter the battery will last. The
battery needs about an hour and a half to get fully charged.
In order to charge the tracker, it is necessary to use the Geeksme charger
included in the watch box. We strongly advise our users against any other charge
method they can come up with as it may result in battery or device break.
Firmware update
In case there is any firmware update for your Geeksme device, the app will show
a pop up message when it is connected to the watch. You will have to accept the
update for it to be installed.
Please be aware that updating your device firmware may delete the information
recorded during that day.
