background image

Note

: For a better taste and good for your health, we suggest you to  

             rinse the machine and release the water out.

1. Assemble the Drip Tray in the proper position(fig. 1~2).

1. Unpack the box with care.

2. Before using this product for the first time

     - It is advisable to test it only with water.

     - Clean the parts that will come into contact with food.

3. Before connecting the machine, check that ON/OFF button is not pressed,

     and Rotating Control Knob is in central position 0

     - It is advisable to test it only with water.

     - Clean the parts that will come into contact with food.

4. Follow below steps to fulfill the priming of unit when first starting:

     - Make sure that the water tank is filled with water to the Max mark. 

     DO NOT overfill the Max mark.

     - Plug in and turn on the machine. The buttons on the control panel will 

     flash red and blue by turns.

     - KEEP THE ROTATING KNOB IN MIDDLE POSITION. Don't rotate the knob.

     - Press any button, the unit will start pumping a small amount of water and 

     exit to the drip tray. Wait till the water finishes, then the unit will enter to 

     pre-heating mode.

     - The button will stop flashing when pre-heating is finished. Gently remove 

     the drip tray and pour out the dispensed water. Now the unit is ready for use.
     Above simple operation ensures optimum dispensing and must be carried out:

     - When first starting.

     - When the machine has been out of use for a long time (1 or 2 weeks).

     - When the tank has run out of water.

HOW TO USE

How To Use

5

BEFORE FIRST USE

THE FIRST TIME OR A LONG TIME NOT USE THE MACHINE

(Fig. 1)

(Fig. 2)

Содержание CJ-265E





















Отзывы: