Geeetech 3D WiFi, Руководство пользователя

Страница: 24 / 48

22
You can set the target temp for extruder and hotbed and click OK to save the temp.
Switch the button on the right to cancel the target temp.
5.1.4 Level
When the printer is idle, it is accurate and efficient to use 5 points leveling method to
calibrate the building platform.
Click the [Level] icon and the following picture will pop up. At the same
time, X/Y/Z axis will be homed in sync and the printer will check the max moving distance
for each axis. Different printers need various homing time. For instance, if the homing
position of an axis is at its min coordination, this axis will move toward to its max
coordination to measure its homing position. Please make sure the usability of M114, M119
instructions.
Move the printing head to the 5 points respectively to finish the leveling job. Remember
to use an A4 paper to help you weigh the leveling effects.
When Z axis is at its max coordinate, use to adjust the height of building