Geco G-913-P01, Руководство по эксплуатации и обслуживанию

Страница: 7 / 12

USER MANUAL G-913-P01 PAGE 7
PPUH „GECO” Sp. z o.o. ISSUE I AS OF 2018.09.13
After inserting the USB device into the device, the LED lights up permanently and goes out
only after USB operation
.
DO NOT REMOVE THE USB HEADER FROM THE SOCKET WHEN
THE SIGNAL LIGHT IS ON!
THIS WILL DAMAGE WRONG FILES AND DAMAGE USB STORAGE
DEVICE!
Writing data to a USB drive can take from a few seconds to several minutes depending on the
hardware characteristics of the media and the amount of data written on it!
8.1 Date and time changing
To change date and time you need to plug in USB storage device with saved text file named
"CLOCK.txt" to the USB connector.
Text file should be in the following format (see Fig 2.):
D: yyyy.mm.dd T: HH: MM
Where:
yyyy – year,
mm – month,
dd – day,
HH – hour,
MM – minute,
Warning!!!
Omitting the configuration variables "D:" and "T:" will bypass the change of date
and time, and these variables are necessary to properly decode the file and save
the file REPORT.txt in which additional information will be attached.
Fig 2.
An example of correct encoding of the file CLOCK.txt