Geco G-913-P01, Руководство по эксплуатации и обслуживанию

Страница: 4 / 12

USER MANUAL G-913-P01 PAGE 4
3 Technical Data
Operating voltage
230V AC +10% -15%
Power frequency
50

60Hz
Operating temperature range
od +5
°
C do +40
°
C
Humidity
od 20% do 80% RH
Sensor type
NTC 2,2k
Sensor operating temperature
range
NTC: -40
°
C

120
°
C
Recording interval
5 min
Number of recording memory
entries
30000 pozycji
4 CONNECTING AND POWERING THE RECORDER
The room where the Recorder is installed should be equipped with a 230V/50Hz electrical
system, in accordance with applicable regulations. The device does not require an external power
supply and can be connected directly to the mains. Connect the power cable conductors
according to the installation diagram shown in Fig. 1.
THE RECORDER IS CONNECTED TO 230V/50HZ POWER.
DISCONNECT THE POWER AT THE FUSE BEFORE ATTEMPTING
TO MAKE ANY REPAIRS
In order to enable the recorder to work in the event of a power failure or damage of the power
cord, G-913 was equipped with a built-in lithium-polymer battery. The recorder can work on
batteries for 1.5 - 2 weeks. The battery is automatically charged every time the power returns and
its high state of charge is maintained to ensure the longest possible battery life.
In new recorders the battery can be discharged and the clock reset. After correct installation of
the device, the date and time should be set up immediately according to point 8.1.