NOTES:
The signals monitored by this connector are selected by the ST/PFL
switch and the channel PFL switches.
18. AUX SEND / AUX RETURN
AUX SEND
This is impedance-balanced ¼” TRS output connector. This connector outputs the signal from AUX bus.. You
use this connector, for example, to connect to an external effects unit or to a cue box or other such
monitoring system.
AUX RETURN
This is impedance-balanced ¼” TRS input connector. The signal received by this input connector is sent to
the STEREO bus and the AUX bus. This input connector is typically used to receive a return signal from an
external effects unit (reverb, delay, etc.).
19. REC OUT (L, R)
- L (ODD) and R (EVEN)
These are unbalanced RCA-type output connectors. By connecting these connectors to an external recorder,
you can record the same signal that is being output from the ST (STEREO) OUT
- L (ODD) and R (EVEN)
connectors.
NOTES:
The mixing console’s ST (STEREO) L & R faders do not operate on the
signal output from these connectors. Be sure to make appropriate level adjustments
at the external recording device.
20. ST (STEREO) OUT
- L (ODD) and R (EVEN)
These balanced ¼” TRS connectors output the mixed signal whose level is adjusted by the ST (STEREO) L
& R faders. Output is in STEREO (L and R). Application examples: you can use these connectors to connect
to an additional power amplifier driving your main speakers or to a pair of powered speakers, and or to
connect to an external recording device.
______________________________________________________________________________________
5
5
© GECKO MUSIC GROUP. All Rights Reserved.
