REAR PANEL
21. POWER SWITCH
Use this switch to set the mixing console power to ON [I] or STANDBY [O].
WARNING:
Note that trace current continues to flow while the switch is in the
STANDBY position. If you do not plan to use the mixing console again for a long
while, be sure to unplug the adaptor from the wall outlet.
22. FUSED IEC - AC POWER CORD RECEPTACLE
Plug the AC power cord (supplied) into the GECKO® EXODUS ATOM MXR 808A Active Audiophile Mixing
Console. Plug the other end into a standard wall power outlet. The fused IEC - AC receptacle protects the
mixing console from possible electrical hazards caused by power overload. Take care to route power cables
away from audio lines.
23. VOLTAGE SELECTOR
This switch is pre-set at the factory for the proper local voltage, so there is no need to change the switch
setting. For 110V operation, set the VOLTAGE SELECTOR to 110V.
______________________________________________________________________________________
6
6
© GECKO MUSIC GROUP. All Rights Reserved.
21
22
23
24
25
26
27
27
