MIC/LINE INPUT SECTION
MIC/LINE INPUT SECTION
Channel inputs and inserts are provided as XLR female and/or ¼” (6.3mm) TRS/TS sockets. The
connections for these inputs are assigned as follows.
NOTES:
We recommend the use of GECKO® TRUTH T3AL audiophile signal
cables and OLYMPIAN series audiophile connectors for optimal/lossless sound
transmission of your performance.
1. MIC INPUT
These are balanced XLR female type input connectors. Connect balanced microphone to
this XLR female input. An unbalanced microphone can be connected provided that +48V
phantom power not used. Wired as follows.
Balanced: Pin 1 = Ground ; Pin 2 = (Hot) ; Pin 3 = Signal - (Cold)
Unbalanced: Pin 1 = Ground ; Pin 2 = (Hot) ; Pin 3 = Ground
2. LINE INPUT
These are balanced phone-type (¼” TRS) input sockets. Connect balanced or
unbalanced instrument or line level signals to these ¼” (6.3mm) TRS sockets. Wired as
follows.
Balanced: Tip = (Hot) ; Ring = Signal - (Cold) ; Sleeve = Ground
Unbalanced: Tip = (Hot) ; Sleeve = Ground
3. CHANNEL INSERT
Signal can be sent from channel to processor(s) and returned back to the channel by
connecting a ¼” TRS (stereo) connector to 2 x ¼” TS (mono) connectors lead to this
socket. The channel inserts are post Low Cut and pre-EQ. Wired as follows.
¼” TRS connector:
Tip = Send ; Ring = Return ; Sleeve = Ground
Left (
¼” TS connector)
: Tip = Send ; Sleeve = Ground
Right (
¼” TS connector)
: Tip = Return ; Sleeve = Ground
______________________________________________________________________________________
3
3
© GECKO MUSIC GROUP. All Rights Reserved.
1
2
3
