CHANNEL ROUTING
CHANNEL ROUTING
______________________________________________________________________________________
7
7
© GECKO MUSIC GROUP. All Rights Reserved.
20. FX POST
This control governs the amount of signal from the channel routed to the DSP effects
engine. If a jack is connected to the FX SEND connector (see
38
below), this will operate
as an extra AUX output (POST means post-fader - i.e. the signal routed to FX SEND
is also affected by the channel fader level).
21. AUX POST
This control governs the amount of signal from the channel routed to the AUX SEND or
auxiliary output to external equipment. (POST means post-fader - i.e. the signal routed to
FX SEND is also affected by the channel fader level).
22. POST / PRE
Pressing this button in changes MON 1 and MON 2 outputs from POST to PRE. POST is
post-fader, meaning the signals to MON 1 and MON 2 are also affected by the channel
fader level. PRE is pre-fader, meaning the signals to MON 1 and MON 2 are not affected
by the channel fader level.
23. MON 1
This control governs the level of signal routed to the MON 1 OUT XLR connector. The
output can be used for monitoring or recording equipment.
24. MON 2
This control governs the level of signal routed to the MON 2 OUT XLR connector. The
output can be used for monitoring or recording equipment.
25. PAN / BAL
This control adjusts the amount of signal from the channel fed to Left or Right outputs.
This varies the point in the stereo field that the signal appears. For ST 1 and ST 2
channels, the PAN control is replaced with a BAL control for Left/Right balance.
20
21
22
23
24
25
