STATUS INDICATORS
STATUS INDICATORS
The master section has 4 status LEDs, which indicate as follows.
MAIN OUTPUT VU METERS
MAIN OUTPUT VU METERS
MASTER FADERS SECTION
MASTER FADERS SECTION
The Master Fader Section controls output level for monitors (MON 1 & MON 2), DSP Effects (FX),
and MAIN L/R outputs.
POWER
When lit, indicates that main power is on.
PFL/AFL
Pre-Fade or After-Fade Listen is active.
______________________________________________________________________________________
15
15
© GECKO MUSIC GROUP. All Rights Reserved.
The main output level meters comprise a pair of volume ladders with
15 LEDs in each. These normally display the MAIN L/R output levels
unless PFL or AFL is active.
When one or more PFL or AFL buttons are pressed in, these ladders
will show the output of that channel (or those channels) directly.
This enables more detailed analysis of the signal level than can be
shown by the SIG and CLIP LEDs alone.
When monitoring any signal levels, it is important to prevent the red
LEDs from lighting for anything longer than a brief flicker. Persistent
lighting of the red LEDs indicates clipping or distortion.
63. MUTE
Press to mute the relative output(s). LED indicator lights
when muted.
64. PFL/AFL
Activates Pre-Fader Listen for monitors or After-Fader Listen
for DSP Effects (FX). The output of either is routed to the
headphones (34) output and displayed on the main level
meters (see above).
65. VCA FADERS
Output VCA faders for MON 1-2, FX, and MAIN L/R. Decibel
markings (dB) give a reference to the level setting applied.
63
64
65
