DETAILED
PARAMETERS
30
260
USER
GUIDE
4.5 Band Pass Filter(BP)
The BP is used to divide the
input signal into several
frequency bands. This allows
the user to drive the speaker in
its optimum frequency range
and send each output
separately for more efficient
use of amplifier power. The
parameter setting interface is
as follows:
Bypass
When "Bypass" is "on", the box behind it is highlighted in green; when the
box is in white, it means that "Bypass" is off. When "Bypass" is "on", the
BP is turned off; when "Bypass" is "off", the BP is turned on.
Channels 1-6
There are all together six
channels. The display of the
channels depends on the
setting of the BP unit on the
main interface. The parameter
of the combined BP unit
channels is set together as one.
As illustrated in the above
diagram, Channels: 1,2,3
means that Channels 1, 2 and 3
of the BP unit on the main
interface are combined. On the parameter setting interface, the selected
channel will be highlighted, while the channel that is not selected is
displayed in blue. This can be illustrated by the curves in the following
diagram:
