Geberit HS30, Руководство по обслуживанию

Страница: 19 / 152

EN
9007210246122763 © 05-2023
971.552.00.0(01)
19
Geberit Control app
The Geberit Control app is available for commissioning, making settings and malfunction diagnosis. The app
communicates with the device via a Bluetooth® interface.
The Geberit Control app is available free of charge for Android and iOS smartphones in the respective app
stores.
*HEHULW
$SSV
KWWSVJEUWLRGVY)
Rectifying malfunctions
Malfunctions during operation are indicated by the control unit displays. The malfunction diagnosis is carried
out with the Geberit Control app. The faults are also displayed in the app (highlighted in red or orange).
Malfunction Cause Remedy
No flush actuation, status
LED off Operating voltage inter-
rupted ▶ Check the mains voltage.
▶ Check the power supply unit.
No flush actuation, status
LED lights up green
• No flushing programme
active
• Solenoid valve
defective
• Control unit defective
▶ Check flushing programmes with Geberit Control
app.
▶ Test solenoid valve with the <Test> button.
▶ Replace the control unit.
Status LED lights up
orange
Warning:
e.g. maintenance interval
expired
▶ Read out malfunction message with Geberit
Control app.
▶ Rectify malfunction according to instructions in the
Geberit Control app.
Status LED lights up red
and buzzer on
1)
Malfunction:
e.g. volumetric flow rate
sensor defective
▶ Read out malfunction message with Geberit
Control app.
▶ Rectify malfunction according to instructions in the
Geberit Control app.
1) Serious faults such as backpressure are always indicated by the buzzer. Other faults are only displayed if the buzzer
is activated in the <Device settings> menu.