Geberit AquaClean 4000, Руководство пользователя

Страница: 6 / 25

User manual Geberit AquaClean 4000
7
Integrated control panel
<Shower>, start and stop
Press the button: The spray arm moves into position and the
shower procedure starts. The shower automatically stops
after 20 s.
You can stop the shower before this by pressing the
<shower> button.
Press the button again: The shower stops.
<Spray intensity>
Press <+> or <-> during the shower procedure to change
the spray intensity.
There are 5 spray intensity levels to choose from.
The memory function stores the most recently set spray
intensity.
<Water heater function> ON/OFF/economy mode
Pressing the button switches the water heater function on,
off or to economy mode.
LED Meaning
Lights up blue Heating element is switched on
Flashes blue Switching to economy mode. In economy mode (factory
setting), the heating element only switches on if user
detection is activated. The warm-up time is 2 to 3 minutes.
Does not light up Heating element is switched off or economy mode is
switched on and user detection is not activated.
Flashes red Error message (see "Troubleshooting")