Geberit AquaClean 4000, Руководство пользователя

Страница: 13 / 25

User manual Geberit AquaClean 4000
14
Troubleshooting
Malfunctions during operation
DANGER
Danger of fatal electric shock
`
Never open and repair the device yourself
`
Never replace damaged mains connection cables yourself
`
Contact customer service
Malfunction Malfunction Malfunction Malfunction Cause Cause Cause Cause Fault clearance Fault clearance Fault clearance Fault clearance
No function Mains plug is not connected to
power outlet Connect the mains plug
Defective fuse on electrical
distributor Replace the fuse on the electrical
distributor
Fuse in mains connection cable
is defective Disconnect the mains plug and
contact customer service
Power supply is interrupted Have the power supply checked
by a skilled person
Shower water temperature is
too low Heating element is not switched
on Set the <water heater function>
to ON on the control panel
Warm-up time too short when
heating element is in economy
mode Set the <water heater function>
to ON on the control panel
Shower spray is too weak or
no water is spraying out at all Spray intensity is set too low Increase the spray intensity
Spray nozzle clogged or blocked
with limescale Clean or replace the spray nozzle
Basket filter is clogged or
blocked with limescale Clean or replace the basket filter
Spray arm does not retract Power supply is interrupted Restore the power supply. The
spray arm will retract
automatically
Enhancement solution is
defective Switch off the enhancement
solution and contact customer
service
Lowering function not
working Hydraulics are defective Contact customer service
Water runs out of the
overflow on the left next to
the spray arm Disconnect the mains plug, close
the angle stop valve, and contact
customer service