Geberit 501-1, Руководство по эксплуатации

Страница: 18 / 64

EN
Operation
Controls
1 Red LED
2 Brightness sensor
3 <Flush time> button
4 <Hygiene> button (interval flush)
Testing the function
After the battery has been inserted or a connection to the mains voltage has been established,
the red LED indicates the status of the urinal flush control.
Red LED Status Description/measure
1 short flash pulse, then 2-
second pause
OK
Urinal flush control is functional.
No flash pulses
Fault
Urinal flush control is not functional: check
the battery or mains connection.
3 short flash pulses, then 2-
second pause
Fault
Solenoid valve is not connected to the
control unit: check the cable connection.
2 short flash pulses, then 2-
second pause
Fault
Urinal trap is not connected to the control
unit: check the cable connection.
3 long flash pulses, then 2-
second pause
Fault
Sensor 1 in urinal trap is defective: check
the cable connection or replace the urinal
trap.
4 long flash pulses, then 2-
second pause
Fault
Sensor 2 in urinal trap is defective: check
the cable connection or replace the urinal
trap.
18 18014402741989259-1 © 07-2019
968.645.00.0(01)