Operation
S ta tu s M es sa ge s
5
Status Message s
RS232
Status
Centr
.Busy
Centr.
Error
Centr.
Select
Centr
.PE
LED-
Power
LED- Er-
ror
Commen ts
Paper end
Paper end 10%
"P"
"Z"
x
x
1
1
0
1
1
LED off
flas hing 3:1
flas hing 1:1
LED off
also , whe n cas ette is rem ove d
Tempera ture too high
Vp-too low
GND error
Error remedie d
"T"
"M"
x
x
"G"
"X"
x
x
0
0
1
1
0
1
1
1
0
0
LED off
LED off
0
0
LED off
LED on
flas hing 1:1
flas hing 1:1
flas hing 1:1
LED off
RESET
Input buffer empty:ON
Input buffer full: XOFF
Sync. feedback
"R"
= 11h
0
= 13h
1
LED off
LED on
LED on
LED on
LED off
LED off
Reset triggere d by Vcc
LED off
LED off
Operating Console:
An operating console is located on the front of the device with two standard keys and
LEDs.
FEED Key:
When the feed key is pressed, the printing of a line will be completed, before the paper is
transported. At that time, it is fed by only one blank line (24 dot lines, depending on the
selected font), followed by a small brake. If the key is still pressed afterwards, the printer
will feed line by line without interruption until the key is released. This function allows the
specific feeding by only one blank line by striking the key. After the paper feed, normal
printing is continued at the beginning of the next line.
The printer is equipped with a
self test function
. It is triggered, when the feed key is
pressed immediately after connecting the supply voltage.
ENTER Key:
Pressing the ENTER key initiates the printing of stored text file T1. Depending on its con-
tent, it can call another stored text file.
LED POWER:
The power LED is lit green, whenever the printer is ready for operation. It flashes, when
the paper supply is running low.
LED ERROR:
The error LED does not light up as long as no error occurs. It flashes in case of an error.
For its control, please refer to the table "Status Messages" below.
G e B E E +F G m b H • w w w . o e m - p r i n te r . c o m • G e B E D o c . N o . S M A N - E - 487 - V 1. 1 • G P T - 444 3 • P ag e 5/ 12
