GeBe GPT-4352 Скачать руководство пользователя страница 4

GeBE E + F GmbH • www.oem-printer.com • GeBE Doc.No.: SMAN-E-413-V4.1 Easy-Loading Thermal Printer  GPT-4352(-60)

Packing List

4

3 Packing List

All printer sets GPT-4352(-60) contain:
-

 tansparent LEVER (exchangeable)

- 5 paper rolls: GPR-T01-058-031-007-060A resp.  GPR-T01-058-060-007-060A for GPT-4352-60
- operating manual: SMAN-E-413
In addition the different sets contain:

SET1 

GPT-4352-LV-82-24-LC-at 

• GKA-406: RS232 interface cabel, 500 mm
• GKA-410: Power cable, 

one side open, 250 mm

SET2 

GPT-4352-LV-82-24-V.24-EVAL-at

• GKA-406: RS-232 interface cable 500 mm
• GKA-416: Connecting cable for charger, 

190 mm

• GNA-4.8V-1,6Ah-NiMH: Battery, 

4x Mignon (AA)

• GNG-6V-0.8A-U: Charger

SET3 

GPT-4352-LV-82-24-SPI(4,5V)-EVAL-at

• GKA-407:  Connecting cable 12pol. 

to Centronics Adapter 

• GPT-4382-10: Centronics  Adapter

      25 pol Sub-D Stift

• GKA-410:  Power cable, 

one side open, 250 mm

GPT-4352

GPT-4352-60

SET1 

GPT-4352-60-LV-82-24-LC-at 

• GKA-406: RS232 interface cabel, 500 mm
• GKA-410: Power cable, 

one side open, 250 mm

SET2 

GPT-4352-60-LV-82-24-V.24-EVAL-at

• GKA-406: RS-232 interface cable 500 mm
• GKA-416: Connecting cable for charger, 

190 mm

• GNA-4.8V-1.6Ah-NiMH: Battery, 

4x Mignon (AA)

• GNG-6V-0.8A-U: Charger

SET3 

GPT-4352-60-LV-82-24-SPI(4,5V)-EVAL-at

• GKA-407:  Connecting cable 12pol. 

to Centronics Adapter 

• GPT-4382-10: Centronics  Adapter

      25 pol Sub-D Stift

• GKA-410:  Power cable, 

one side open, 250 mm

SET4 

GPT-4352-LV-82-24-IR2-EVAL-at

• GCT-4382-20: external IR- adapter
• GKA-408: connecting cable to external IR
• GKA-416:  connecting cable for charger, 

190 mm

• GNA-4.8V-1.6Ah-NiMH: battery, 4x Mignon

(AA)

• GNG-6V-0.8A-U: Charger

SET4 

GPT-4352-60-LV-82-24-IR2-EVAL-at

• GCT-4382-20: external IR- adapter
• GKA-408: connecting cable to external IR
• GKA-416:  connecting cable for charger, 

190 mm

• GNA-4.8V-1.6Ah-NiMH: battery, 4x Mignon

(AA)

• GNG-6V-0.8A-U: Charger

While unpacking, check if all parts on the packing list are present and undamaged. Make sure that all parts deli-

vered are removed from the packaging. Claims for compensation that are based on damage that occured during

shipment can only be asserted, if the delivery service is notified immediately.
Please write a damage report and send it back to the supplier together with the defective part(s).

SET5

GPT-4352-LV-82-24-V.24-LC-at-DC/DC

• G

KA-435: Power cable

• G

KA-414: 

RS-232 TTL interface cable,

                    500 mm

SET5 

GPT-4352-60-LV-82-24-V.24-LC-at-DC/DC

• G

KA-435: Power cable

• G

KA-414: 

RS-232 TTL interface cable,

                    500 mm

Содержание GPT-4352

























Отзывы: