Geax XD5, Руководство по обслуживанию, Страница: 9 / 41

GEAX
s.r.l.
Chapter 2
DRILLING MACHINE SCHEDULED MAINTENANCE 2-4
2.2.2
Operations relating to the replacement of lubrication / hydraulic oils
First of all:
•
operate when the components are not hot;
•
provide a container to collect the lubricant drained from the machine and
for any leakage during the loading stage;
•
wear impermeable gloves;
•
work in a ventilated area;
•
bear in mind that used lubricant is toxic therefore handle with care and
rinse immediately with soap and water if it comes into contact with eyes or
parts of the body;
•
work in absence of open flames;
2.2.3
Winch gear unit scheduled lubrication operations
The lubricant of the winch gear unit must be replaced at a frequency shown in
tab. 2.2.3.1-2
MAIN WINCH GEAR UNIT LUBRICATION
Brevini BWF 2000
LUBRICATION DESCRIPTION
Replacement
frequency
[hours]
Quantity
[c.c]
AGIP ROTRA MP 80W-90
API GL5
2000 350
tab. 2.2.3.1
AUXILIARY WINCH GEAR UNIT LUBRICATION
Brevini DW 090
LUBRICATION DESCRIPTION
Replacement
frequency
[hours]
Quantity
[c.c]
AGIP ROTRA MP 80W-90
API GL5
4000 150
tab. 2.2.3.2
Alternatively one can consult the manufacturer manual to find equivalent lubricant
producers
2.2.4
Hydraulic circuit oil periodic replacement
For this operation refer to the manual of the JCB excavator.
2.2.5
Periodic replacement of the internal combustion engine lubricant
For this operation refer to the manual of the JCB excavator.