Geax XD5, Руководство по обслуживанию, Страница: 17 / 41

GEAX
s.r.l.
Chapter 2
DRILLING MACHINE SCHEDULED MAINTENANCE 2-12
Tolerance notes
A
+A’
0÷1 [mm]
Measurement in points
1,2,3 and 4
B+B’
0÷1 [mm] Measurement in points
1,2,3 and 4
tab.2.5.1.2
The measurements indicated in
tab.2.5.1.2,
can be verified using a thickness
gauge. One must not measure close to the edge (where consumption is
higher) but at a certain depth (dotted area
fig.2.5.1.1
).
In the event of deviation from the above measurements, bring the values
back to the tolerance range using the relevant shims.