background image

  3  SAFETY INFORMATION (Continued)

4

THE FOLLOWING SAFETY RECOMMENDATIONS ARE TO PROTECT YOU FROM 

INJURY; IT IS THEREFORE IMPORTANT TO READ THEM CAREFULLY, MEMORIZE 

THEM AND ALWAYS APPLY THEM.

The warnings indicated in this manual regard exclusively the allowed uses and reasonably foreseeable. 
These instructions must always be followed, in accordance with the good sense and experience of the 
operator as they are essential to prevent accidents.

The machine must be used by a single operator. It is forbidden for use by under age individuals.

All the instructions provided must be followed carefully.

Possible changes on the machine, not preventively authorized by the manufacturer (by written copy), 
exclude his responsibility.

Check the correct functioning of the machine, before each use.

3.2  GENERAL ADVICE

 

  Read this manual carefully before proceeding to start, operate, employ, or perform 

 

 

maintenance on the machine.

 

  Follow all the warnings in this manual, as well as all the general safety and accident 

  

prevention 

information.

 

  The manual must always be handy, so as to consult it in order to check working cycle and safety  

 

 

information. In case of loss or damage, it will be necessary to ask for a replacement copy.

 

 

 

ATTENTION! 

Any maintenance, adjustment, and cleaning operations 

 

 

 

should be done with the machine on the ground (in stable conditions), 

 

 

 

with the tractor motor off, hand brake engaged, ignition key off and 

 

 

 

removed from the ignition panel.

 

  Read carefully the safety signal words applied on the machine and follow the instructions. In

 

 

case of wear and tear or insuffi cient readability of the safety signal words, clean them up or  

 

 

 

replace them, placing the signal words in the right position, as shown on page 3.

 

 

 

 

  ATTENTION! 

WARNING!

 

 

 

The operator, during the period of use, maintenance, repair, handling or storing of 

 

 

 

the machine, must wear accident prevention shoes and safety gloves. Moreover, 

 

 

 

if it is necessary he must wear suitable hearing protections such as earmuffs or 

 

 

 

earplugs, dust masks and protective glasses.

 

  During loading phase, there is the danger of powder inhalation produced by fertilizer mixing.    

 

 

We recommend the use of tractors with cab fi tted with ventilation systems or suitable means of   

 

 

protection of the airways, such as dust protection masks or masks with fi lter.

Содержание PTB560

























Отзывы: