Gearmore PTB560, Инструкция по эксплуатации, обслуживанию и ремонту

Страница: 14 / 24

12
6.3 REGULATING THE DISTRIBUTION
The fertilizer distribution is regulated through the regulation lever that moves the opening section on the
bottom of the hopper.
In order to carry out the regulation, after having consulted the spreading chart that is visible on the hop-
per of the spreader, according to the type of product and the drive speed, it is suffi cient move the lever
"A" along the graduated scale "B" in the required position.
6.4 HOPPER LOADING
We do not recommend that the hopper be loaded manually, but by using a lift device or suitable mechani-
cal devices.
IMPORTANT!
The hopper must be loaded only after the spreader has been
connected to the tractor.
Before loading the hopper, the shutters must be closed; position the distribution adjustment lever in
position "0".
Do not drive for very long distances with a full load and do not put full bags of the fertilizer loaded in the
hopper during the transport to the fi eld or during the working, in order not to overload the capacity of the
machine and to compress the fertilizer.
WARNING! During the operation of transport, stock and use of
fertilizers, the operator must behave in compliance with the
indications on the label of the product and in particular with the
content of the sentences of risk and the precaution advices.
Spreading Chart
(See Page 13)
6 ADJUSTING THE SPREAD (Continued)
Distribution Adjustment Lever