DEALER PREPARATION CHECKLIST
2
THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL
I
T
IS
THE
RESPONSIBILITY
OF
THE
DEALER
TO
COMPLETE
THE
PROCEDURES
LISTED
BELOW
BEFORE
THE
DELIVERY
OR
THE
SALE
OF
THIS
IMPLEMENT
TO
THE
CUSTOMER
.
Dealer Preparation Check List
1.
Implement is completely assembled.
2.
Gearbox filled with oil. (See page 12)
3.
All fittings lubricated. (See page 12)
4.
All shields in place and in good condition.
5.
All fasteners torqued to specifications given in Torque Chart. (See page 15)
6.
Check PTO driveline. Make sure it is the correct length to operate rotary
mower with intended tractor.
7.
Check front of input gearbox shaft and make sure that snap ring is
properly installed. (This is for smooth bore input shaft only.)
8.
Check shear bolt for proper grade and installation.
9.
All decals in place and readable. (See page 5)
10.
Overall condition good (i.e. paint, welds, etc.).
11.
Operator's manual has been given to owner and the owner has been instructed
on the safe and proper use of the rotary mower.
12.
Purchaser elects to delete deflectors. (front and rear rubber belt, front and
rear chains)
______________________________________________________________________________________________________________________________
WARNING
For Non-Agricultural use OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards or other protective guards at all times. Manufacturer strongly recommends the use of
such guards for Agricultural uses as well, to reduce the risk of property damage, serious bodily
injury or even death from objects thrown out by or from contact with the cutting blades.
Dealer's Signature:____________________________________
Purchaser's Signature:__________________________________
Содержание & RC30-84
Страница 17: ...15 TORQUE SPECIFICATIONS...
