Gearmore & RC30-84, Инструкция по эксплуатации, обслуживанию и ремонту

Страница: 20 / 27

GEARBOX & BLADE PAN ASSEMBLY
18
REF# QTY. PART NO. DESCRIPTION
1 1 300150 Blade Pan 60"
1 1 300151 Blade Pan 72" & 84"
2 1 300152 Blade Set (2 blades) 60" & 72"
2 1 300153 Blade Set (2 blades) 84"
3 2 300117 Blade Washer
4 1 300118 Blade Bolt Set
5 1 300154 RC30 Series 5 PTO Shaft w/slip clutch
6 1 300141 85 HP Gearbox
7 1 300203 Blade Hub Nut
8 1 100113 Cotter Pin - Gearbox
9 1 300124 Slip Clutch Shield
IMPORTANT
When sharpening blades, grind each blade the same
amount to maintain balance. Replace blades in pairs.
Unbalanced blades will cause excessive vibration
which can damage gearbox bearings. Vibration may
also cause structural cracks to mower deck.
Sharpen both blades at the same time to maintain
balance. Follow original sharpening pattern. Do not
sharper blade to a razor edge, but leave at least a 1/16"
blunt edge. Do not sharpen back side of blade.