3
1. Lay the bass drum on the floor with the front of the bass
drum touching the floor (the bass drum cymbal mounts
should be closest to the floor).
2. Place the batter head (without the Gear4music logo)
onto the drum and place 1x bass drum hoop on top.
3. Using 6x bass drum tension rods, claws and washers,
line the tension rods up with the 6x screw threads
(these are called drum lugs) that are already mounted
to the bass drum.
4. Using the drum key, screw the 6x tension rods into the
drum lugs to an even tension, so all the creases have
been taken out of the skin. Do not over-tighten.
BASS DRUM ASSEMBLY
ITEMS REQUIRED:
1x Bass Drum (16”)
2x Bass Drum Heads (16”)
2x Bass Drum Hoops
12x Bass Drum Tension Rods, Claws and Washers
1x Bass Drum Pedal and Beater
2x Bass Drum Legs
1x Drum Key
5. Place the 2x bass drum legs into the holes on each side
of the bass drum and tighten the wing nuts to hold them
in place.
6. Turn the bass drum over and repeat steps 2 – 4 on the
opposite side. When placing the skin on the front of the
drum we advise lining the logo up with the tom brackets
so it will be straight when viewed by an audience.
7. Upright the bass drum so that is now resting on the bass
drum legs.
8. Take the 1x bass drum pedal. There is a clamp at the
bottom of the pedal which can be adjusted using the
wing nut. First, unscrew the wingnut and then slide the
clamp between the bottom of the bass drum hoop and
the top of the rubber bass drum hoop protector. Once it’s
in the place, screw the wing nut so that it’s firmly in place.
ASSEMBLY INSTRUCTIONS
Содержание JUNIOR 5 PIECE DRUM KIT
Страница 1: ...JUNIOR5PIECE DRUMKIT SETUPGUIDE...
Страница 2: ...JUNIOR 5 PIECE DRUM KIT...
