5
User Manual |
Unity
Remote | GEAR4
■
UnityRemote’s status LED will slowly blink to indicate it is in pairing
mode. If the LED does not blink, press the button for half a second to
switch UnityRemote off. Then press and hold the button until the solid
light turns into a blinking light.
■
On your iPhone, iPod touch or iPad, open the Settings panel. Tap on
General > Bluetooth.
■
Ensure that Bluetooth is turned on and after a few seconds
UnityRemote will appear in the list of devices (on some versions of
Downloaded from www.vandenborre.be