Disk Module
Clean
surrounding
the solid disk surface units
Chrome section.
NOT USE steel wool or abrasives on the brushed
chrome parts of the module.
The solid disk surface units are made
high
strength cast-iron
The
has a heat-resistant coating to
preserve the surface of the unit. After the unit cools,
any boiled-over material on the surface units should
be removed as soon as possible with a slightly damp
cloth. The unit should then be dried by switching on
for a few minutes.
it cools, wipe lightly with
cooking oil.
Clean very dirty solid disk surface units with a
little cleaning powder (such as
cleanser)
or with a scouring pad.
The matte black surface can be maintained by
treating it periodically with CO11O
polish
which is available from your
supplier. Use the
applicator to apply a very thin coating of the polish to
the entire surface unit surface. Turn the unit on high
for several minutes to bake the polish to the unit.
When the unit is cooled, rub lightly with a cloth or
paper towel to remove any excess polish. Before next
use, burn off the unit by means of a short preheating
period. A slight amount of’ smoke and odor
occur.
Failure to maintain the solid disk surface units as
directed will result in defacing the surface over a
period of time primarily due to corrosion, as the
surface units are made of cast-iron construction.
Do not use covers over the solid disk surface units.
A surface unit turned on while the cover is in place
can permanently damage the cooktop. Covers can also
trap moisture which may cause the surface units rust.
Porcelain Enameled Grease Wells
Porcelain enamel can crack or chip with misuse.
When cleaning porcelain grease wells, be careful not
can stain if spill
of foods with a high acid
to get the electrical receptacles wet. Do not try to fill
content (such as tomatoes or lemon juice) are not
the wells with water.
cleaned up quickly.
Brushed Chrome Finish
Clean brushed chrome with warm, soapy water
To help prevent finger marks after cleaning,
or Bon
brand cleanser. Rinse and immediately
spread a thin film of baby oil on the surface or a
dry it with a clean, soft cloth. Take care to dry the
chrome protestant may be used to help reduce
surface following the “grain.”
spotting or fingerprinting. Wipe away excess oil
with a clean, soft cloth.
Chrome Module Surfaces
Remove the module from the cooktop and place on
Apply the pad-type oven cleaner evenly to the entire
several layers of newspaper. Remove the coil surface
chrome portion
the module top. The entire chrome
units and drip pans.
area of the top must be cleaned to keep the finish
consistent in color. Use extreme caution to prevent the
oven cleaner from coming in contact with any other
surfaces. Let the cleaner remain on the top for 20 to
30 minutes. Rinse the top well to remove every trace
of oven cleaner. Dry the top and apply Armor All
Protestant
@
to protect the finish.
(continued next
41
