GEA Lagoon Agitator Скачать руководство пользователя страница 38

Страница: 38 / 64

Operating

Checks before operating

2010-9015-017
04-2015

38 / 64

Operating

8.1

Special personnel qualification required for operation

Operation must be performed by qualified personnel in accordance with the
safety instructions.

Read the section Safety - Personnel qualifications.

8.2

Safety instructions for operation

Attention!

To operate the equipment safely, the tractor operating the equipment
must meet the tractor specifications given. Refer to the Technical data
- Tractor specifications section.

● The equipment must always be attached to the tractor draw bar to prevent

the PTO from separation.

● Be careful when positioning the agitator in the pit. Move the tractor backward

at low speed.

● Never leave the agitator in operation without the supervision of a qualified

operator.

● The tractor must be immobilized with parking brakes or wheel chocks to

keep it from entering in manure storage.

● During operation, it is strictly forbidden to stand in the working area.

Read the section Safety.

8.3

Checks before operating

● The safety devices such as guards, covers, chains, labels, etc. remain in

place to ensure safety;

● Lubricants such as grease, oil, etc. are at appropriate level. To locate the

grease points, refer to section Appendix - Label position;

● The product is in perfect condition. There is no visible damage;

● Only authorized personnel are in the working area of the equipment;

● No unnecessary object or material is located in the working area of the

equipment.

Содержание Lagoon Agitator

































































Результаты поиска

Содержание Lagoon Agitator

Отзывы:

Похожие инструкции для Lagoon Agitator

Бренды по названию

Популярные бренды

GEA Lagoon Agitator, Инструкция по эксплуатации

Результаты поиска

Содержание Lagoon Agitator

Отзывы:

Похожие инструкции для Lagoon Agitator

Бренды по названию

Популярные бренды