Safety
6
BA.10A.CNY.001.01.10.GB
2. Safety
2.1 Instructions for the operator
2.1.1 General information
All our pumps are professionally packed before they leave our
warehouse to avoid damage during transport.
Unpacking
If, after carefully unpacking and inspecting the shipment, you
however find damage, you must promptly inform the shipping
agent (railway, post office, lorry driver, shipping line, etc.).
Your claim should be filed with the shipping agent. The ship-
ping risk passes to the customer as soon as the shipment
leaves our warehouse.
Storage
If the pump is not put into service immediately, it is important
that it is stored properly to ensure that it will function correctly
later. This is just as important as proper installation and main-
tenance.
The pump must be protected from cold, moisture, and dust as
well as from mechanical influences.
Specially trained personnel is required to install and maintain
the pump properly.
2.2 Safety instructions in the
operating manual
Read safety instructions!
The operating manual contains all basic information required
for the set-up, operation, and maintenance of the pump. The
installer as well as the technical personnel or operator re-
sponsible for the pump must therefore read this manual be-
fore installing and starting the pump. The operating manual
must always be available at the site where the machine/sys-
tem is being used. Not only the general safety instructions
presented in this section but also the specific safety instruc-
tions in later sections must be followed.
2.3 Identification of instructions in
the operating manual
Symbol
The safety instructions presented in this operating manual are
identified as shown below.
Fig. 1
Symbol for safety instructions
Overview
This section describes what you have to consider for your own safety. You will learn the structure and identifica-
tion of safety instructions. Read this important section attentively!
!
