GEA Bock HGZ Series, Руководство по сборке

Страница: 17 / 42

D
GB
F
E
17
09726-09.2013-DGbF
1 Liquid subcooler 5 Expansion valve FUA liquid subcooler,
2 Filter drier 6 temp. sensor expansion valve Outlet
3 Solenoid valve 7 Pressure compensation connection FUE liquid subcooler,
4 sight glasses Inlet
INFO! General notes:
Sensor lines, wires, etc. should not be attached with cable binders
directly to pipes or frames; otherwise, the thin pipes may be worn
through. It is better to run them through spiral protective tubes.
If the compressor will be set up outside, UV-resistant materials
should be used.
Ø 16 mm
Ø 16 mm
Ø 16 mm
Ø 16 mm
Ø 6 mm
Ø 12 mm
Ø 12 mm
Ø 12 mm
FUE
Mitteldruckkammer MP
Wärme-
dämmung
Fig. 20
5 | Compressor assembly
5.3 Installation example, liquid subcooler with accessories
Dia.16 mm
Dia.12 mm
Heat
insulation
from the receiver
to the evaporator
Line A
Line B
Line B
Dia. 16 mm
Dia. 16 mm
Dia.6 mm
Dia.12 mm
Dia.12 mm
Dia. 16 mm
Intermediate pressure
chamber MP