27
If the washer gives a
short burst of beeps and… Possible Causes and What to Do
First Rinse or Spin light is
•
Wash load is out of balance. Open the lid
flashing as well as SPIN SPEED
and redistribute the load. Check and make
light
sure the machine is level. To program the
washer to correct itself when a load becomes
unbalanced, see Out of Balance Recovery
section.
If the washer beeps
•
Unplug the washer from the outlet. Wait
continuously…
15 seconds and plug it back into the outlet.
If fault reoccurs repeat this procedure. If
fault occurs a third time the washer needs
servicing. Contact GE Consumer Service.
Beeps
(continued)
Washer is unplugged
•
Make sure cord is plugged securely into a
working outlet.
Controls are not set properly
•
Check controls and make sure
START/PAUSE has been pressed.
Circuit breaker/fuse is
•
Check house circuit breakers/fuses. Replace
tripped/blown
fuses or reset breaker and wait 15 seconds
before turning the power on again. Washer
should have separate outlet.
Washer Won’t Operate
Water supply is improperly
•
Make sure hoses are connected to correct
connected
faucets.
Lid is open
•
Close lid and press START/PAUSE.
Inlet hoses kinked
•
Check inlet hoses.
Wash Cycle Does
Not Start
Problem
Possible Causes
What to Do