20
Operating Instructions
Changing factory-set options
When your washer is spinning it
can sense when the wash load is out
of balance and will stop and retry
spinning. If the machine still senses
an unbalanced load it will stop,
give a short burst of beeps every
five seconds and the Rinse or Spin
light and the Fast SPIN SPEED
light will flash. Redistribute the
load more evenly yourself.
Your washer can correct out of bal-
ance loads by filling with water, agi-
tating to redistribute the load and
spinning.
If you would like your machine to
automatically try and correct out of
balance loads follow the instruc-
tions below.
1
Enter the Option Adjustment
Mode. (Press START/PAUSE
and hold down. Press POWER.)
2
The HEAVY DUTY pad is used
to select the out of balance
recovery option you prefer.
HEAVY DUTY light on = automatic
HEAVY DUTY light off = stops
3
Press POWER to return to
normal mode and store your
changes.
Out of Balance
Recovery
You can increase or decrease the
fill level that Auto WATER LEVEL
will select.
NOTE:
We recommend you check the water
level by pausing the machine and
pushing the clothes down to see how
much water is in the basket. Clothes
often float and your washer can
sense the water under the clothes.
1
Enter the Option Adjustment
Mode. (Press START/PAUSE
and hold down. Press POWER.)
2
The WASH CYCLES pads now
define the amount of water used
in Auto WATER LEVEL.
FAVORITE light on = lower level
PERM. PRESS light on = factory-set
WOOL light on = high level
DELICATE light on = higher level
REGULAR light on = highest level
3
Press POWER to return to
normal mode and store your
changes.
Auto Water Fill Level
