GE WCVH4800K, Техническое обслуживание руководство

Страница: 55 / 57

– 55 –
Error
Code Description Action
3E4 IPM over
heating
error Check integrity of the main PCB. Replace if necessary. •
tE Water
thermistor
error Check integrity of the thermistor. Replace if necessary. •
dE Door open error The door is not closed. •
- Please close the door again as the washer will not function correctly when •
the door is left open.
Check the door DC switch. Replace if necessary. •
dE1 Door lock error The door is not closed. •
- Please close the door again as the washer will not function correctly when •
the door is left open.
If the fault persists and re-appears, replace the door lock switch. •
dE3 Door unlock
error The door is not closed. •
- Please close the door again as the washer will not function correctly when •
the door is left open.
If the fault persists and re-appears, replace the door lock switch. •
If the fault persists and re-appears, replace the main PCB. •
bE2 Button error Check button operation. •
If the fault persists and re-appears, replace the sub PCB. •
AE Communication
error between
Main and Sub
PBA Check the integrity of the wiring between the main PCB and sub PCB. •
Clear the fault and run the cycle. If fault persists and reappears, replace the •
main PCB.
SF System Failure
error Replace the main PBA. •
DE2 Door Protection This occurs if power to the door circuit is on and off continually and •
excessive heat is generated.
UE Out of Balance
Error Washer was unsuccessful in recovering from an out of balance condition •
during the fi nal spin and 34 minutes was added to the cycle timer.
NOTE: It’s important to note error codes should only be used to help identify those components which
require testing. Never replace a part based solely on an error code. The control can generate a false error
if the right conditions exist. Use the code only as a reference and always check the component before
replacing.