10
Setting Up the VCR
Startup
9.
Place channels in the VCR’s memory.
Channels 2 through 13 including line inputs (
L1
and
L2
) are in the
VCRÕs memory when you first turn it on. The VCR stops on these
channels when you press
CHANNEL
up or down. To get
additional channels available on your antenna or cable system,
you must use the
Auto Channel Search
feature of the VCR. If you
ever change cable or antenna signals, you may need to auto
channel search again.
See Cable Box Setup on page 28.
A
. Press
VCR1
to set remote to control VCR.
B
. Press
MENU•PROG
on the remote to see the
VCR MAIN MENU
on the TV screen.
If the menu does not appear on the TV screen:
¥ Press
VCR1
and then press
MENU•PROG
.
¥ If you have used one of the basic hookups, make sure the
TV is tuned to the same channel (3 or 4) as the
Output
Channel
selected in the
PREFERENCES
menu.
Check
VCR
indicator in display panel Ñ it should be on.
Press
TV•VCR
to turn it on.
¥ If you have connected your VCR using one of the advanced
hookups, tune your TV to its video input (refer to TV
OwnerÕs manual).
¥ Check the connections.
C
. Press
3
to select
CHANNELS
.
D
. Press
1
to begin
Auto Channel Search.
Wait until the channel numbers stop changing. The TV will
then tune to the lowest channel found. Press
CHANNEL
up or
down to select the active channels.
The VCR automatically selects
ANTENNA
or
CABLE
for the
Signal Type
feature in the
CHANNELS
menu
.
If you need to
change the setting manually, press
3
.
10.
Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the channels
are not active, have weak signals, or you do not want to watch
them.
A
. Press
VCR1
on the remote.
B
. Press
MENU•PROG
on the remote to see the
VCR MAIN MENU
on the TV screen.
C
. Press
3
to display the
CHANNELS
menu.
D
. Press
2
to display the
ADD/REMOVE CHANNELS
menu.
E
. Follow the directions on the screen.
F.
Add or remove more channels by entering channel numbers or
using the
CHANNEL
buttons.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
ADD/REMOVE CHANNELS
CH 03
is presently ADDED
Press CLEAR to remove
Press MENU to exit
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable Box Setup
0 Exit
