GE VG2042 Скачать руководство пользователя страница 51

Страница: 51 / 56

APPENDIX A: REFERENCE

Will not record or play

•

Check to make sure there is a tape in the VCR.

•

Try ejecting and reinserting the cassette.

•

Check to make sure the tape is not broken.

•

Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY on the remote
(PLAY•PAUSE on the VCR) to return to normal playback.

Will not record

•

Check to make sure the safety tab is intact.

•

Check to make sure the VCR is not in the line mode. Press INPUT on the remote.

Rewind does not operate

•

Check to make sure the tape is not already rewound.

Timer recording not made or wrong program recorded

•

Check to make sure the cable box was turned on when recording was to begin.

•

Check to make sure the program was entered correctly (wrong channel or times).

•

Power interruption. Reset the clock.

•

Check to see if time and date are correct—including AM/PM.

•

Check to make sure the program did not exceed the tape’s length or the tape was not rewound
beforehand.

•

Check to make sure the VCR was turned off at the time recording was to start.

•

Check to make sure there was a tape in the VCR and the cassette’s safety tab was intact.

•

VCR ejects cassette when the end of the tape is reached during a timer recording.

Internal clock shows incorrect time or date

•

Power interruption.

•

Check to make sure the clock is set accurately (check AM/PM and date).

•

Check Auto DST setting. The clock may have adjusted for daylight-saving time.

Time did not adjust for daylight-saving time

•

Check to make sure Auto DST feature is turned on.

VCR makes noise when stopped

•

VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to
rotate for a few minutes after you put the VCR in the stop mode.

Содержание VG2042

























































Результаты поиска

Содержание VG2042

Отзывы:

Похожие инструкции для VG2042

Бренды по названию

Популярные бренды

GE VG2042, Руководство пользователя

Результаты поиска

Содержание VG2042

Отзывы:

Похожие инструкции для VG2042

Бренды по названию

Популярные бренды