manualshive.com logo in svg

GE V7768, Справочник по аппаратуре

Поделиться
Скачать
GE V7768 Скачать руководство пользователя страница 43

Standard Features  43

2.7 Ethernet Controller

The network capability is provided by the Intel 82571 Dual Ethernet Controller for 
Gigabit Ethernet. This Ethernet controller is PCI-E bus based and is software 
configurable. The V7768/V7769 support 10Base-T, 100Base-TX and 1000Base-T 
Ethernet.

10Base-T

A network based on the 10Base-T standard uses unshielded twisted-pair cables, 
providing an economical solution to networking by allowing the use of existing 
telephone wiring and connectors. The RJ45 connector is used with the 10Base-T 
standard. 10Base-T has a maximum length of 100 meters.

100Base-TX

The V7768/V7769 also support the 100Base-TX Ethernet. A network based on a 

 

100Base-TX standard uses unshielded twisted-pair cables. 100Base-TX has a 
maximum length of 100 meters.

1000Base-T

The V7768/V7769 support 1000Base-T Ethernet using the Intel  82571 dual 
Ethernet controller. The interface uses shielded cables with four pairs of 
conductors, along with an RJ45 connector on the front panel. 

NOTE

Ethernet activity is noted on the front panel LEDs by a blinking 

yellow LED. The yellow LED will be on continuously when the 

Ethernet port is linked but with no activity.

Содержание V7768





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды