GE V7768 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 92

background image

20 V7768/V7769 Hardware Reference Manual

1 • Installation and Setup

This chapter describes the hardware jumper settings, connector descriptions,
installation, system setup and operation of the V7768/V7769.

1.1 Unpacking Procedures

Any precautions found in the shipping container should be observed. All items
should be carefully unpacked and thoroughly inspected for damage that might
have occurred during shipment. The board(s) should be checked for broken
components, damaged printed circuit board(s), heat damage and other visible
contamination. All claims arising from shipping damage should be filed with the
carrier and a complete report sent to GE Customer Care along with a request for
advice concerning the disposition of the damaged item(s).

CAUTION

Some of the components assembled on GE products may be

sensitive to electrostatic discharge and damage may occur on

boards that are subjected to a high energy electrostatic field. When

the board is placed on a bench for configuring, etc., it is suggested

that conductive material be inserted under the board to provide a

conductive shunt. Unused boards should be stored in the same

protective boxes in which they were shipped.

1.2 Hardware Setup

The V7768/V7769 are factory populated with user-specified options as part of the
V7768/V7769 ordering information. Contact Sales for ordering information at

1-800-322-3616. For option upgrades or for any type of repairs, contact customer
care to receive a Return Material Authorization (RMA).

GE Customer Care is available at:

(1-800-433-2682), 1-780-401-7700.

Or, visit our website

www.ge-ip.com.

The V7768/V7769 are tested for system operation and shipped with factory-
installed header jumpers. The physical locations of the headers and connectors for
the SBC with the PMC option are illustrated in

Figure 1-1 on page 21

Figure 1-1 on page 21

. The definitions of the connectors, headers and switches are

included in Table 1-1 on page 22.

CAUTION

All jumpers marked

User Configured

in the following tables may be

changed or modified by the user. All jumpers marked

Factory

Configured

should not be modified by the user.

Care must be taken when making jumper modifications to ensure

against improper settings or connections. Improper settings may

result in damage to the unit.

Modifying any jumper not marked

User Configured

will void the

Warranty and may damage the unit.

«
...
18
19
20
21
22
...
»

Содержание V7768





























































































Отзывы:

Нет отзывов

Похожие инструкции для V7768

Бренд: Avalue Technology Страницы: 12

Бренд: MIPS Страницы: 10

Бренд: AKM Страницы: 34

Бренд: AKM Страницы: 45

Бренд: WIN Enterprises Страницы: 82

Бренд: ASROCK Страницы: 126

TPS53355EVM-864

Бренд: Texas Instruments Страницы: 29

Бренд: MSI Страницы: 186

Бренд: Microsemi Страницы: 15

Бренд: Tews Technologies Страницы: 26

Бренд: Tadao Страницы: 3

Бренд: Intersil Страницы: 26

Бренд: ALi Confidential Страницы: 24

Бренд: Aura Light Страницы: 8

Бренд: Texas Instruments Страницы: 7

Бренд: Cebekit Страницы: 8

Бренд: Fastrax Страницы: 12

Бренд: JETWAY Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды