GE TruVision DVR 20, Руководство пользователя, Страница: 89 / 126

53BChapter 6: Advanced setup
TruVision DVR 20 User Manual 85
Figure 43: Network setup screen (LAN submenu shown)
To define network settings:
1. In the Menu toolbar click the Network icon. The LAN submenu screen appears.
2. Enter the following information:
Option Description
Network Type Select one of the four options:
DHCP : The DHCP (Dynamic Host Configuration Protocol) server in the
LAN will automatically assign an IP for network connection.
Static : Select if using a fixed IP address for network connection.
PPPoE : Only select this option if using a direct connection to the DSL.
Verify with your ISP if they use PPPoE.
Off : Select if not using a network connection.
IP This field shows the DVR’s current IP address.
If using a static IP address, enter the IP value. If DHCP or PPPoE is
selected as network type, this value will be assigned automatically.
Subnet Mask This field shows the subnet mask for your network so the DVR will be
recognized within the network.
If using a static IP address, enter the subnet mask value. If DHCP or
PPPoE is selected as network type, this value will be assigned
automatically.
Gateway This field shows the gateway for your network so the DVR will be
recognized within the network.
If using a static IP address, enter the gateway value. If DHCP or PPPoE
is selected as network type, this value will be assigned automatically.
DNS Server 1 This field shows the primary DNS server for your network.
If DHCP is selected as network type and an internet connection is
available, this value will be assigned automatically. The DNS server
must have a valid DNS address in order to use the DDNS feature (see
Chapter 8 “eZ DDNS” on page 111).