(GEXLPS21 & GEXLPS21-U)
• Supports all colors of Tetra
®
XL and
Tetra
®
Power White XL LED Lighting Systems
• Class 2 wiring per NEC Article 725 (SELV)
• Damp location rated
• IP66 rated: separate enclosure required
Connect the supply wire that is
attached to the LED strip to the
power supply load bank using
the GECLSC2 splice connector.
2
Connect the AC line to the
black (line) and white (neutral)
input wires of the power
supply using 18-14 AWG
(0.82-2.08 mm
2
) twist-on wire
connectors.
1
NOTE:
Exceeding maximum
load will cause the power supply
to shut down. Once the excess
load is removed, cycle the input
power to restart the power
supply.
Specific load information for
the supported LED systems can
be found in the “
Power Supply
Specifications
” section on the
next page.
Tetra
®
LED Systems Power Supply
Input
wires
White (neutral)
Black (line)
AC line
Splice connector GECLSC2
Load bank
Supply wire
to LED strip
Red (+)
White (-)
Blue
GE
Lumination
Installation Guide
12
Volt
imagination at work
Power Supply Installation
Power Supply Features
WARNING
Risk of electrical shock.
Turn power OFF before inspection,
installation or removal.
