manualshive.com logo in svg

GE SymVeo SV-XP1, Руководство пользователя, Страница: 36 / 60

Поделиться
Скачать
GE SymVeo SV-XP1 Скачать руководство пользователя страница 36

SymVeo IP Camera

User Manual

30

Configuration

Clicking on the 

Configure

 link will launch the Configuration 

webpage. On this page you can remotely modify the following 
settings of the SymVeo:

•

Network settings: including the IP address, subnet mask, 
and gateway address.

•

Streaming settings: including: set the unit as a sender, 
sender-enable setting, sender port, sender control enable, 
sender control port, and sender multicast address.

•

Camera MPEG setting: including set the MPEG quality, 
format and resolution.

•

Display option: option to display the camera title. 

•

Mail server and recipient settings: includes setting 
destinations  to receive email from a predefined email 
server after the trigger button has been pressed.

•

Date and time settings: including setting the time of the 
camera to synchronize with the server.

•

IP filter settings: Including the three modes: Disable, 
White list, black list

•

Xposure settings: Including four Xposure presets.

•

Web settings: Including the web server IP address.

•

Web user management: Including adding, deleting, and 
editing a web user on this page.

•

Factory Reset: an easy method to restore the factory 
defaults.

 

Содержание SymVeo SV-XP1





























































Отзывы:

Нет отзывов