53
6. Use the
Arrow buttons
to enter the time the recording will end. Entering a time "before" the start time
will cause the unit to record until the indicated stop time on the next day. When finished entering the
stop time, use the
Arrow buttons
to navigate to the
ON/OFF
setting.
7. Use the
Arrow buttons
to Activate, Deactivate, or Delete the recording.
8. When finished, click the
Enter
button to exit the Edit mode. Use the
Arrow buttons
to navigate to
[OK]
, then click the
Enter
button to complete the selection.
Editing a Timed Recording:
1. Using the
Arrow buttons
to navigate, highlight the event parameter you wish to edit.
2. click the
Enter
button to enter the Edit mode.
EDIT MODE
will appear on-screen, in the lower left-
hand corner of the pop-up menu.
3. Use the
Arrow buttons
to change the values. Use the
Arrow buttons
to navigate among parameters
in the same row.
4. When finished, click the
Enter
button to exit the Edit mode. Use the
Arrow buttons
to navigate to
[OK]
, then click the
Enter
button to complete the selection.
Deleting a Timed Recording:
1. Using the
Arrow buttons
to navigate, highlight the
ON/OFF
parameter of the event you wish to
delete.
2. click the
Enter
button to enter the Edit mode.
3. Use the
Arrow buttons
to select
DEL
from the menu.
4. click the
Enter
button to confirm the selection and exit the Edit mode.
5. Use the
Arrow buttons
to navigate to
[OK]
, then click the
Enter
button to remove the selection and
exit the menu.
Main Menu
/
Record Settings
Figure 56. The record settings menu
Use this menu to specify:
•
The MPEG record settings
•
The record rate for each camera.
•
The percentage of Variable Bitrate Encoding (VBR)
Содержание SymDec 4
Страница 1: ...GE Security SymDec 4 User Manual ...
Страница 5: ...v Online publication library 84 ...
Страница 6: ...SymDec 4 User Manual vi ...
Страница 19: ...13 Figure 5 Typical network setup ...