manualshive.com logo in svg

GE SymDec 4, Руководство пользователя, Страница: 56 / 90

Поделиться
Скачать
GE SymDec 4 Скачать руководство пользователя страница 56

SymDec 4

User Manual

50

Main Menu 

/

 Alarms

 /

 Email

Figure 52. The email notification screen

This screen allows you to setup the types of events to be notified of, and the email addresses (up to three) to be 
notified. Follow the context sensitive on-screen instructions to setup the individual fields. Also, please note 
that the Region/Time Zone setting must be set correctly for Email notification to time stamp messages 
accurately. If the Notify Alarm or Notify Record fields are enabled you will be notified of the results of the 
Disk Test.

Note:  

The 

Notify Connection

 alert only applies to a Ethernet connection, not a serial connection.

Email Address Format

The format of the email addresses should be entered as follows. If the email address to be notified is 

[email protected]

, then john.doe should be entered in one of the 

Email User

 fields and 

somecompany.com should be entered in the subsequent 

Email Domain

 field.

Содержание SymDec 4



























































































Отзывы:

Нет отзывов