GE RM24961, Инструкция по эксплуатации

Страница: 14 / 20

12
Trouble Shooting
Problem
No device buttons
light when you
press any key
The remote does
not operate your
device
Not performing
commands
properly
Problems
programming
a TV/VCR Combo
Unit
VCR not
recording
Problems chang-
ing channels
No response
after pressing
a key
Solution
A) Replace the batteries
(with fresh, new AAA
Alkaline batteries).
B) Check that batteries are
properly installed.
A) Try all the codes listed
for your brand.
B) Try the Code Search
method (page 8).
Start Code Search over again
to locate the proper code.
NOTE: Some functions of
certain brands/models may
not be operable.
Try the VCR code for your
brand. Some combo units,
however, may require both a
TV and a VCR code for full
operation.
As a safety feature on your
remote, you must press the
REC button twice.
If your original remote
required ENTER after a chan-
nel, press ENTER after you
select a channel.
A) Make sure you have
new batteries, and you
are aiming your remote
at your devices.
B) Check that batteries are
properly installed. See
page 2.
C) Check that nothing is
blocking the line of sight
of your infra-red reciever
in your equipment.
Reprogramming may be required after
batteries are removed.
24961 manual/NOSPAN 12/11/03 9:33 AM Page 13
This Manual: http://www.manuallib.com/file/2589422