background image

THERMOSTAT WARRANTY

For The Period Of: 

GE Appliances Will Replace:

One Year 

Full Replacement

 of the thermostat which fails 

From the date of the 

due to a defect in materials or workmanship.  

original purchase 

For Warranty replacement, contact your distributor.

What GE Appliances Will Not Cover:

Ŷ

  Service trips to your location.

Ŷ

  Improper installation. If you have an installation problem, contact 

your installer. You are responsible for providing adequate electrical 
connections to the product. 

Ŷ

  Failure of the product resulting from modifications to the product or 

due to unreasonable use, including failure to provide reasonable and 
necessary maintenance.

Ŷ

  In commercial locations, labor necessary to move the unit, after it has 

been initially installed, to a location where it is accessible for service by 
an individual technician; or, if the instructions included in this manual 
have been disregarded.

Ŷ

  Replacement of location fuses or the resetting of circuit breakers.

Ŷ

  Damage to the product caused by improper power supply voltage, 

accident, fire, floods or acts of God.

Ŷ

  Incidental or consequential damage caused by possible defects with 

this thermostat.

Staple your receipt here.  

Proof of the original purchase date is 

needed to validate the warranty.

This warranty is extended to the original purchaser and any succeeding owner 
for products purchased for use within the USA and Canada. In Alaska, the 
warranty excludes the cost of shipping or service calls to your site.

Some states or provinces do not allow the exclusion or limitation of 
incidental or consequential damages. This warranty gives you specific legal 
rights, and you may also have other rights which vary from state to state or 
province to province. To know what your legal rights are, consult your local, 
state or provincial consumer affairs office or your state’s Attorney General.

EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive 
remedy is product exchange as provided in this Limited Warranty. Any 
implied warranties, including the implied warranties of merchantability 
or fitness for a particular purpose, are limited to one year or the 
shortest period allowed by law.

16

Warrantor: GE Appliances, a Haier company

 

Louisville, KY 40225

Содержание RAK149F2

















Отзывы: