14
TESTING THE THERMOSTAT
Heat Test
1.
Slide
Function
switch to
Heat
position.
Heat
mode screen is
displayed.
2.
Adjust set temperature so it is 5 degrees above room
temperature.
3.
Heat should come on within a few seconds.
4.
Adjust the set temperature so it is 2 degrees below the
room temperature and the heat should turn off.
Note:
There is a 3 minute time delay and a 3 minute minimum
run time for the compressor when it turns on/off. (On
some models, the fan may also have a minimum run time/
off time delay).
