QS–24
UR SWITCH MODULE – QUICKSTART GUIDE
QUICKSTART GUIDE
A valid IP address and subnet mask can now be programmed into the Switch using the IP
config command as follows:
Z
Type in “
ipconfig ip=
“.
Z
Enter the IP address (in our example we will use a unique address
between 3.94.247.1 and 3.94.247.254), followed by a space.
Z
Type in “
mask=
“ and enter the mask (in our example system we
would use 255.255.252.0).
Z
If a default gateway is also required enter a space and type “
dgw=
“
Z
Enter the IP address of the gateway, then select the
enter
key.
The switch will then indicate that the parameters have been set.
Z
Save the settings using the
Save
command.
