GE PSH23PGR Series, Техническое обслуживание руководство

Страница: 7 / 62

– 7 –
• To change the temperature, press and release the WARMER or COLDER pad. The SET light will
come on and the display will show the set temperature.
• To change the temperature, tap either the WARMER or COLDER pad until the desired temperature
is displayed.
• Refrigerator temperatures can be adjusted between 34°F and 44°F and the freezer temperatures
can be adjusted between –6°F and +6°F.
• Once the desired temperature has been set, the temperature display will return to the actual
refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required. Each
time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.
• To turn the cooling system off, tap the WARMER pad for either the refrigerator or the freezer until
the display shows OFF. To turn the unit back on, press the COLDER pad for either the refrigerator
or freezer. The SET light will illuminate on the side you selected. Then press the COLDER pad
again (on the side where the SET light is illuminated) and it will go to the preset points of 0°F for the
freezer and 37°F for the refrigerator.
• Setting either or both controls to OFF stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
Control Features
• The temperature controls are preset in the factory at 37°F
for the refrigerator compartment and 0°F for the freezer
compartment.
• Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
• The temperature controls can display both the SET
temperature as well as the actual temperature in the
refrigerator and freezer.
• The actual temperature may vary slightly from the SET
temperature based on usage and operating environment.
• Setting either or both controls to OFF stops cooling in both
the freezer and refrigerator compartments, but does not shut
off electrical power to the refrigerator.